Contents
Index
WLAN - VLAN with Multi SSID WLAN
Introduction
Configuration
Configuring the wireless networks
Configuring VLANs
Defining rules for receiving at the ports
Removing ports from VLAN management
Enable VLAN
Configuration on bintec S128p
Result
Checking the connection
Overview of configuration steps
WLAN - bintec Hotspot Solution
Introduction
Performance features
Hotspot solution features
Gateway features
Hotspot server features
Configuration
Configuration of the bintec Hotspot gateway
Configuration of the bintec Hotspot server by the dealer
Administration of Hotspot accounts
Operation at several locations
Configuring login methods
Anonymous login
1-Click
SMS
PayPal
Default Free Service
Instructions for safe operation
Multiple login
Preventing mutual visibility of extensions
Encrypted/unencrypted WLAN connection
WPA Encryption
IP/ARP Spoofing
Overview of configuration steps
WLAN - 802.1x authentication using a Microsoft Server 2008
Introduction
Server configuration
Configuration of active directory certificate services
Reservation of access point IP addresses at DHCP server (Windows Server 2008)
Installation of network policy and access services (NPS/RADIUS server)
Configuration of network policy and access services (NPS/RADIUS server)
RADIUS configuration of the access point
WLAN configuration of the access point
Connection of a Windows 7 WLAN client
Importing the certification from the certification authority (CA certificate)
Configuration of the Windows 7 WLAN client
Overview of Configuration Steps
WLAN - Bintec WLAN Controller Introduction
Functional overview
Project planning
Determining customer requirements
Recommended hardware installation on site
System requirements
WLAN Controller hardware
Access Point hardware
WLAN Controller software licences
Network configuration
WLAN Controller device network settings
DHCP server
Internal DHCP server
External DHCP server
No DHCP server - APs with static IP address settings
WLAN rollout with the WLAN controller wizard
Wizard Step 1
Wizard Step 2
Wizard Step 3
Wizard Step 4
Start WLAN rollout to access points
Appendix
E-mail alert in case of access point failure
Configuration of a DHCP server on another Bintec router
Configuration of a DHCP server on Windows Server 2003/2008
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Configuration of a DHCP server under Linux
Operation of APs with static IP address settings
Overview of configuration steps
WLAN - VoWLAN Basics and Configuration
General
WLAN infrastructure
WLAN radio illumination
Handover between the access points
Bandwidth requirement
The safety standard and the handover
QoS, WMM and U-APSD
WMM priority classes and COS (Layer 2) mapping
U-APSD (Unscheduled Automatic Power Save Delivery)
WLAN controllers – A must in a VoWLAN network?
Potential sources of interference
Example configuration
Network plan
WLAN configuration with or without WLAN controller
Ascom i62 Talker configuration
Requirements
Configuration
Create a new telephone
Test commands on the Ascom i62
Configuring the elmeg hybird 300
Configuration
Operational scenario: WLAN telephone cannot be accessed
Use other WLAN telephones
Overview of Configuration Steps
WLAN Management for Multiple Locations: WLAN controller via VPN
Introduction
Requirements
About the test setup
Configuration
Presettings
Configure the router in the field office
IP configuration
Configure DHCP pool
Configure the VPN concentrator at head office
Configure the WLAN controller at head office
IP configuration
Set up the default route
Configure WLAN controller
Configure wireless network profile
Configure Radio Profiles
Configure access points
Set up an email alarm
Overview of Configuration Steps
WLAN - Wireless LAN Controller as Network Access Gateway
Introduction
Configuration
Overview of Configuration Steps
WLAN network with guest WLAN
Introduction
Configuration
Configuring the IP address
Create bridge groups and assign LAN interface
Put Wireless LAN Controller into operation
Choose radio profile and configure WLAN access to the local network.
Configure guest WLAN
Configure Access Points with the Wireless LAN Controller
Configure the IP address for the virtual Bridge Interface
Configure the IP Address Range for the guest network
Configure DHCP use
Set up firewall
Result
Overview of Configuration Steps
WLAN - WLAN controller installation with integrated HotSpot functionality
Introduction
Function
Configuration
Basic configuration
LAN configuration
HotSpot configuration
DHCP configuration
Wireless LAN controller wizard
Overview of configuration steps
WLAN - Cloud NetManager
Introduction
First steps in the portal
Creating a user
Changing the time zone
Importing the licences
Creation of profiles
Creation of network profiles (SSID)
Creation of radio profiles
Creation of device templates / access point template
Administer devices
Register and administer access points
Manually register devices
Automatically register device
Device administration
Batch operations and software update
Appendix
Establishing another data centre
URL allocation via DHCP Option 43
Direct URL change in the GUI
Automatic configuration
Error search
A new device is not visible
No more communication with an administered device
Further debug options
Debugging at device level