Introduction

The following chapters describe how to configure a VLAN (Virtual LAN). You connect your WLAN clients wirelessly to the corporate network via a W2003ac™. W2003ac™ serves as the access point for the wireless networks Management , Development and Public . The Ethernet interface to which your hard-wired LAN is connected is operated in bridge mode and is connected over a VLAN-capable switch to the hard-wired network. The network is segmented virtually in the VLANs Management , Development and Public .

Configuration is performed with the GUI™ (Graphical User Interface).

VLAN segmenting

Requirements

The following are required for the configuration: