RADIUS configuration of the access point

When a WLAN client logs in, the access point routes the authentication request to the RADIUS server (Windows 2008 NPS) as a RADIUS request. The RADIUS server is configured at the bintec™ access point using the GUIGUIGUI.

Go to System Management -> Remote Authentication -> RADIUS -> New.

System Management -> Remote Authentication -> RADIUS -> New

To configure the RADIUS server, proceed as follows:

To control access to WLAN network, you must set Authentication Type to the value WLAN (802.1x) .
Enter the IP Address of the Windows 2008 server, e.g. 192.168.1.10 .
Communication with the RADIUS server is protected by a RADIUS password. Here, please use the password saved in the RADIUS server.
Press OK to confirm your entries.