WLAN configuration of the access point |
You can adapt settings of the WLAN wireless module to requirements. In our example, we're using the 2.4 GHz band with automatic channel selection.
Go to Wireless LAN -> WLAN -> Wireless Module Settings -> .
To configure the access point, proceed as follows:
For Operating Mode, select Access-Point / Bridge Link Master .
For Frequency Band select 2.4 GHz In/Outdoor .
Set Channel to Auto .
Leave the remaining settings unchanged and confirm with OK.
With configuration of a wireless network (VSS), authentication requests of a WLAN client are routed to the configured RADIUS server.
Go to Wireless LAN -> WLAN -> Wireless Networks (VSS) -> New.
To configure wireless networks, proceed as follows:
In Network name (SSID) enter workshop , for example.
For Safety Mode, the WPA Enterprise safety mode
must be selected.
For WPA Mode select WPA and WPA 2 .
For WPA Cipher select AES and TKIP encryption.
For WPA2 Cipher select AES and TKIP encryption.
Leave the remaining settings unchanged and confirm with OK.
Copyright© Version 01/2020 bintec elmeg GmbH |