Operational scenario: WLAN telephone cannot be accessed

A call to the WLAN telephone may fail if, for example, the subscriber is situated outside the range of an access point, the telephone is switched off, or if the battery is dead. To ensure calls are not lost, it is a good idea to set up call forwarding on busy / on no reply in the elmeg hybird 300™ for the extensions concerned.

Go to Call Routing -> Outgoing Services -> Call Forwarding -> New.

Call routing -> Outgoing Services -> Call Forwarding -> New

Proceed as follows:

  1. Select an Internal Number for which incoming calls are to be forwarded.

  2. For Type of Call Forwarding, select On busy / On no reply .

  3. Enter a Target Number to which incoming calls should be forwarded on busy or on no replay.

  4. Confirm with OK.

Copyright© Version 01/2020 bintec elmeg GmbH