Create bridge groups and assign LAN interface |
Create a new bridge group and assign the LAN interface to these.
Go to System Management->Interface Mode / Bridge Groups->Interfaces.
System Management->Interface Mode / Bridge Groups->Interfaces
Proceed as follows to assign the LAN interface to a new bridge group and to transer the IP address of the LAN interface to the bridge group.
Choose the line en1-0 under Mode / Bridge Group New Bridge Group .
Set to Configuration Interface en1-0 .
As soon as you have pressed
OK, the bridge group
br0
is created automatically and the interface
en1-0
is added to this bridge group. The bridge group
br0
automatically receives the IP configuration for the
en1-0
interface. You can check the IP configuration of the bridge
group
br0
in the
LAN -> IP Configuration -> <br0> ->
menu.
Copyright© Version 01/2020 bintec elmeg GmbH |