Defining rules for receiving at the ports

In the Port Configuration menu, you can define the rules for receiving frames at the VLAN ports.

Proceed to the following menu to define the Port VLAN Identifier (PVID):

  1. Go to LAN -> VLAN -> Port Configuration.

LAN -> VLAN -> Port Configuration

Proceed as follows:

  1. In addition to the Interface vss2-1 , select the Port VLAN Identifier (PVID), in this example Development .

  2. In addition to the Interface vss2-2 , select the Port VLAN Identifier (PVID), in this example Public .

  3. Leave the option disabled for the interfaces en1-0 and en1-1 under Drop untagged frames. Enable the option for the interfaces en1-0 and en1-1 under Drop non-members.

  4. Click OK.

Copyright© Version 01/2020 bintec elmeg GmbH