IP configuration |
First of all you set the WLAN controller's IP parameters.
Go to
LAN -> IP
Configuration ->Interfaces ->
<en1-0>
.
LAN ->
IP Configuration-> Interfaces ->
<en1-0>
Proceed as follows:
For the Address Mode, select Static .
In this field, enter the IP Address e. g. 10.0.0.123 and the Netmask 255.255.255.0 .
Leave the Interface Mode set to Untagged .
Confirm with OK.
Copyright© Version 01/2020 bintec elmeg GmbH |