Overview of Configuration Steps |
| Action | Menu | Value |
|---|---|---|
| Operation Mode | Wireless LAN Controller -> Slave AP Configuration -> Radio Profiles -> New | Access Point |
| Operation Band | Wireless LAN Controller -> Slave AP Configuration -> Radio Profiles -> New | 2.4 GHz In/Outdoor |
| Number of Spatial Streams | Wireless LAN Controller -> Slave AP Configuration -> Radio Profiles -> New | 2 |
| Wireless Mode | Wireless LAN Controller -> Slave AP Configuration -> Radio Profiles -> New | 802.11 g/n |
| Max. Transmission Rate | Wireless LAN Controller -> Slave AP Configuration -> Radio Profiles -> New | Auto |
| Action | Menu | Value |
|---|---|---|
| Network Name (SSID) | Wireless LAN Controller -> Slave AP Configuration -> Wireless Networks (VSS) -> New | e. g. Bintec-Dev-Voice |
| Intra-cell Repeating | Wireless LAN Controller -> Slave AP Configuration -> Wireless Networks (VSS) -> New | Disabled |
| Security mode | Wireless LAN Controller -> Slave AP Configuration -> Wireless Networks (VSS) -> New | WPA-PSK |
| WPA Mode | Wireless LAN Controller -> Slave AP Configuration -> Wireless Networks (VSS) -> New | WPA2 |
| WPA2 Cipher | Wireless LAN Controller -> Slave AP Configuration -> Wireless Networks (VSS) -> New | AES and TKIP enabled |
| Preshared key | Wireless LAN Controller -> Slave AP Configuration -> Wireless Networks (VSS) -> New | e. g. supersecret |
| ACL Mode | Wireless LAN Controller -> Slave AP Configuration -> Wireless Networks (VSS) -> New | Disabled |
| VLAN ID | Wireless LAN Controller -> Slave AP Configuration -> Wireless Networks (VSS) -> New | 10 |
| Field | Menu | Value |
|---|---|---|
| Call number | Numbers -> New | e. g. 2011 |
| DHCP mode | Network -> Network B | Enable |
| SSID | Network -> Network B | e. g. Bintec-Dev-Voice |
| Security mode | Network -> Network B | WPA-PSK & WPA2-PSK |
| WPA-PSK passphase | Network -> Network B | e. g. supersecret |
| Voice power save mode | Network -> Network B | U-APSD |
| 802.11b/g/n channels | Network -> Network B | 1,6,11 |
| IP DSCP for voice = 0x2E (46) | Network -> Network B | 0x2E (46) |
| IP DSCP for signaling = 0x2E (46) | Network -> Network B | 0x2E (46) |
| User display text | Device -> Settings | e. g. bintec elmeg |
| Active network | Device -> Settings | Network B |
| Time zone | Device -> General | Central European Time (GMT+1) |
| NTP server | Device -> General | e. g. 192.168.1.254 |
| VoIP protocol | VoIP -> General | SIP |
| SIP proxy IP address | VoIP -> SIP | e. g. 192.168.2.253 |
| SIP proxy password | VoIP -> SIP | e. g. supersecret |
| Authentication identity | VoIP -> SIP | Endpoint number |
| Field | Menu | Value |
|---|---|---|
| Based on Ethernet Interface | LAN -> IP Configuration ->Interfaces -> New | e.g. en1-4 |
| Interface Mode | LAN -> IP Configuration ->Interfaces -> New | Tagged (VLAN) |
| VLAN ID | LAN -> IP Configuration ->Interfaces -> New | 10 |
| Field | Menu | Value |
|---|---|---|
| Internal Number | Call routing -> Outgoing Services -> Call Forwarding -> New | Internal number |
| Type of call forwarding | Call routing -> Outgoing Services -> Call Forwarding -> New | On busy/On no reply |
| Target Number (On Busy) | Call routing -> Outgoing Services -> Call Forwarding -> New | Target number |
| Target Number (On no reply) | Call routing -> Outgoing Services -> Call Forwarding -> New | Target number |
| Copyright© Version 01/2020 bintec elmeg GmbH |