Configuration

A SIP subscriber must be set up for the VoWLAN telephone. The DSCP value being set to 0x2E / 101110 / 46, which is vital, is taken into account as the default setting, so that no further change is required here.

In our example, the network interface of the elmeg hybird 300™ must be tagged with VLAN ID 10 .

To access the configuration interface enter the IP address of the elmeg hybird 300™ in your Web browser.

Go to LAN -> IP Configuration -> Interfaces -> New.

LAN -> IP Configuration ->Interfaces -> New

Proceed as follows:

  1. For Based on Ethernet Interface, select the virtual interface, e. g. en1-4 .

  2. For Interface Mode, select Tagged (VLAN) .

  3. For VLAN ID, enter 10 .

  4. Confirm with OK.

Copyright© Version 01/2020 bintec elmeg GmbH