Create a new telephone |
Open the Ascom WinPDM program.
To create a new subscriber, go to Numbers -> New.
In the Call number field, enter the SIP number, e. g. 2011 .
Numbers -> New
With the Ascom i62™, four WLAN networks (networks A to D) can be defined.
Go to Network -> Network B.
Network -> Network B
For it to operate, the following entries are required:
Name | Value |
---|---|
DHCP mode | Enable |
SSID | Bintec-Dev_Voice |
Security mode | WPA-PSK & WPA2-PSK |
WPA-PSK passphrase | e. g. supersecret |
Voice power save mode | U-APSD |
802.11b/g/n channels | 1, 6, 11 |
IP DSCP for voice | 0x2E (46) |
IP DSCP for signalling | 0x2E (46) |
Go to Device -> Settings.
Device -> Settings
For it to operate, the following entries are required:
Name | Value |
---|---|
User display text | e. g. bintec elmeg |
Active Network | Network B |
Go to Device -> General.
Device -> General
For it to operate, the following entries are required:
Name | Value |
---|---|
Time zone | Central European Time (GMT+1) |
NTP server | 192.168.1.254 |
Go to VoIP -> General.
VoIP -> General
For it to operate, the following entries are required:
Name | Value |
---|---|
VoIP protocol | SIP |
Endpoint number | Displays the number of the device and cannot be modified here. The number is specified when the device's parameter set is generated. |
Go to VoIP -> SIP.
VoIP -> SIP
For it to operate, the following entries are required:
Name | Value |
---|---|
SIP proxy IP address | 192.168.2.253 |
SIP proxy password | e. g. supersecret |
Authentication identity | Endpoint number (the number is used as the SIP username) |
Copyright© Version 01/2020 bintec elmeg GmbH |