IP configuration |
As a supplement to the IP workshop »RIPv2 Routing Protocol over IPSec Connection«, the first branch office router's IP interface is configured as follows.
Go the menu
LAN -> IP
Configuration ->Interfaces ->
<en1-0>
.
LAN ->
IP Configuration-> Interfaces ->
<en1-0>
Proceed as follows:
In Address Mode, select Static .
In this field, enter the IP Address / Netmask e. g. 10.1.0.1 of the first branch office router. The IP addresses for the second, third, etc. branches are, as a result, 10.2.0.1 , 10.3.0.1 , etc. As the Netmask you select 255.255.255.0 in this case.
Leave the Interface Mode set to Untagged .
For MAC Address, leave Use built-in selected.
Confirm with OK.
Copyright© Version 01/2020 bintec elmeg GmbH |