Removing ports from VLAN management |
The ports that you have assigned to the Development and Public VLANs will be removed from VLAN Management .
To do this, go to the following menu:
Go to LAN -> VLAN -> VLANs -> <Management> -> .
Proceed as follows:
Click the icon for Interface vss2-1 .
Click the icon for Interface vss2-2 .
Leave the Interfaces en1-0 , en1-1 and vss2-0 Untagged under Egress Rule.
Click OK.
You have now set up all the necessary VLANs. You can check these in the list in the LAN -> VLAN -> VLANs menu.
Copyright© Version 01/2020 bintec elmeg GmbH |