Contents
Index
IP - Network Address Translation (NAT)
Introduction
Configuration
Enable NAT
Configuring NAT enables
Result
Checking the connection
Overview of Configuration Steps
IP - Configuring a bintec router behind a provider router
Introduction
Configuration of the port
Configuring Internet access
Configuration of DMZ
Enabling NAT on the DMZ interface
Configuring portforwarding
Checking the configuration
Checking portforwarding
Checking the functionality
Overview of Configuration Steps
IP - IPTV on xDSL (ADSL / VDSL) T-Home Entertainment connection
Introduction
Configuration
Configuring the bintec be.IP
Configuring the IPTV Multicast data access
Configuring a DHCP IP address pool on the LAN interface
Making a bootable backup of the configuration
Overview of Configuration Steps
IP - RIPv2 Routing Protocol over IPSec Connection
Introduction
Configuration
Configure thebintec RS353at Location B (Head Office)
Configure the bintec RS123 at Location B (Field Office)
Check functioning
Overview of Configuration Steps
IP - Load balancing two Internet accesses used in parallel
Introduction
Configuration
Configuring internet access
Setting up the IP load distribution
Special load distribution handling for encrypted connections
About configuring the DNS server
Overview of Configuration Steps
IP - Load distribution for two VPN IPSec tunnels via separate Internet accesses
Introduction
Configuration
Configure the gateway at head office
Configure the gateway at the branch office
Overview of Configuration Steps
IP - Using Drop-in to connect a branch office to head office with a VPN tunnel
Introduction
Configuration
Overview of Configuration Steps
IP - Set up a DMZ with the drop-in group's functionality
Introduction
Configuration
Configuration of the port
Configure the Drop-in group
Set up the default route
Activating Network Address Translation (NAT)
Firewall configuration
Overview of Configuration Steps