Enable NAT

A list of all NAT interfaces is displayed in the NAT interface menu.

Go to the following menu to enable NAT for your interface:

  1. Go to Network -> NAT -> NAT Interfaces.

Network -> NAT -> NAT Interfaces

Proceed as follows:

  1. Select NAT active for the LAN_EN1-4 interface. This is how the NAT feature is enabled for the interface.

  2. Select Silent Deny for the LAN_EN1-4 interface. If this function is enabled, no ICMP packets are answered.

  3. Confirm with OK.

Copyright© Version 08/2020 bintec elmeg GmbH