Assistants -> Internet -> Internet Connections -> New
Configuring the bintec be.IP |
For configuration, open an Internet browser and start a web (HTTP) connection to the bintec be.IP™ router. Unless otherwise configured, use the standard IP address 192.168.0.251 . Once the HTTP connection has been established, log in using the following access data.
User admin Password admin (default password unless otherwise configured).
The GUI comes with a wizard for configuring VDSL Internet access. To do this, go to the following menu:
Go to Assistants -> Internet-> Internet Connections -> New.
Assistants -> Internet -> Internet Connections -> New
Proceed as follows:
For Connection Type, select External xDSL Modem .
Click on Next to configure a new Internet connection.
Enter the required data for the Internet connection.
Assistants -> Internet -> Internet Connections -> Next
Proceed as follows to configure a new Internet connection:
Under Description, enter a name for the Internet connection, e. g. Internet Data .
Under Physical Ethernet Port select the physical Ethernet port to which the xDSL modem is connected, in this case ETH5 .
For Type, select the Predefined option.
Select the Country in which you would like to set up internet access. Here e. g. Germany .
Under Internet Service Provider select the profile Telekom – VDSL for our VDSL connection.
The following information is required for a T-Online connection:
Under Connection ID enter the 12 digit connection ID you received from T-Online.
Enter the Access Number (mostly 12 digits) you received from Telekom.
Enter the Co-User Number you received from Telekom (for the main user always 0001).
Enter the Password you received from your provider.
In the Always active field, specify whether or not the Internet connection should always be on. Only activate this option if you have Internet access with a flatrate.
Press OK to confirm your entries.
| Copyright© Version 08/2020 bintec elmeg GmbH |