Configuring internet access |
For configuration, open an Internet browser and start a web (HTTP) connection to the bintec be.IP plus™ gateway. The GUI™ comes with a wizard for configuring the two Internet accesses.
To do this, go to the following menu:
Go to Assistants -> Internet-> Internet Connections -> New.
For Connection Type, select Internal ADSL Modem .
Click on Next to configure a new Internet connection.
Enter the required data for the connection.
Assistants -> Internet-> Internet Connections -> New -> Next
Proceed as follows to configure an Internet access:
Under Description enter e. g. ADSL-1 .
For Type, select User-defined via PPP over Ethernet (PPPoE) .
As the User Name, enter the name which your provider has given you, e. g. feste-ip@provider.de .
Enter the Password that your provider has given you, e. g. test12345 .
Press OK to confirm your entries.
To set up the second ADSL connection, run the wizard again.
Go to Assistants -> Internet-> Internet Connections -> New.
For Connection Type, select External xDSL Modem .
Click on Next to configure a new Internet connection.
Enter the required data for the connection.
Assistants -> Internet-> Internet Connections -> New -> Next
![]() |
Note |
---|---|
The message you get when you create the second ADSL connection may be ignored. The IP load distribution avoids routing conflicts due to multiple standard routes! |
Proceed as follows to configure the second Internet connection:
Under Description, enter a name for the Internet connection, e. g. ADSL-2 .
Under Physical Ethernet Port select the physical Ethernet port to which the xDSL modem is connected, in this case ETH5 .
For User Name, enter the access data that your provider has sent you, e. g. #0001@t-online.de .
Enter the Password that your provider has given you, e. g. test12345 .
In the Always active field, specify whether or not the Internet connection should always be on. Only activate this option if you have Internet access with a flatrate.
Press OK to confirm your entries.
When the configuration is complete, the wizard for configuring Internet connections will show two entries.
Go to Assistants -> Internet-> Internet Connections.
Assistants -> Internet -> Internet Connections
Copyright© Version 08/2020 bintec elmeg GmbH |