Enabling NAT on the DMZ interface

NAT must be enabled on the interface used to provide the Internet connection.

Go to the following menu to enable NAT for the DMZ interface:

  1. Go to Network -> NAT -> NAT Interfaces.

Network -> NAT ->NAT Interfaces

Proceed as follows:

  1. Select NAT Active for the LAN_EN5-0 interface. This is how the NAT feature is enabled for the interface.

  2. Select Silent Deny for the LAN_EN5-0 interface. If this function is enabled, there is no feedback for dropped packets to the sender.

  3. Confirm with OK.

Copyright© Version 08/2020 bintec elmeg GmbH