>> MIB - Management Information Base

>> Table: wlanVSSAuthTable - (.1.3.6.1.4.1.272.4.46.27.1)

Description: The wlanVSSAuth does contain some authentication parameters for a VSS.

wlanVSSAuthTable
OIDNameTypeAccess
.1IfIndexINTEGERR
.2ReAuthPeriodINTEGERRW
.3GroupRekeyStrictENUMRW
.4GroupRekeyTimeINTEGERRW
.5BlacklistTrialsINTEGERRW
.6BlacklistTimeINTEGERRW
.7BlacklistDurationUnsigned32RW

IfIndex
Reference to VSS entry (wlanVSSIfIndex) this authentication parameters correspond to.
ReAuthPeriod
EAP reauthentication period in seconds (0=disabled).
GroupRekeyStrict
Rekey GTK when any STA that possesses the current GTK is leaving the BSS.
GroupRekeyTime
Time interval for rekeying GTK (broadcast/multicast encryption keys) in seconds.
BlacklistTrials
The number of failed authentication trails per wlanVSSAuthBlacklistTime before a station is stored into the dynamic blacklist.
BlacklistTime
The time within a station may perform wlanVSSAuthBlacklistTrials failed authentication trials, before it is temporarily blacklisted.
BlacklistDuration
The time a station is kept in the dynamic blacklist after too many failed authentication attempts. A value of 0 indicates that deletion is handled by a WLan Controller not the WLan driver.


MIB Reference to Software Version 10.2.12 generated on 2023/08/29. Provided by webmaster@bintec-elmeg.com
Copyright ©2023 by bintec elmeg GmbH