| SignalLocal |
| This attribute shows the received signal strength in dBm. Range: -110 to 0 |
| SignalRemote |
| This attribute shows the received signal in dBm, as measured by remote bridge link partner. Reading this attribute triggers transmission of a new link request frame. Range: -110 to 0 |
| NoiseLocal |
| This attribute shows the measured noise level in dBm. Range: -110 to 0 |
| NoiseRemote |
| This attribute shows the noise level in dBm, as measured by remote bridge link partner. Range: -110 to 0 |
| SNRLocal |
| This attribute shows the calculated Signal to Noise ratio in dB. Range: 0 to 90 |
| SNRRemote |
| This attribute shows the calculated Signal to Noise ratio in dB, as measured by remote bridge link partner. Range: 0 to 90 |
| FramesTransmitted |
| This attribute shows the number of link test frames transmitted. |
| FramesReceived |
| This attribute shows the number of link test frames successfully received. |
| FramesLost |
| This attribute shows the number of link test frames for which no reply has been received and therefore are considered lost. |
| RateLocal |
| This attribute shows the data rate of the most recent received link test frame, in 500 Kbps units. Range: 0 to 600 |
| RateRemote |
| This attribute shows the data rate of the most recent link test frame received by the link partner, in 500 Kbps units. Range: 0 to 600 |
| RxFrames54 |
| This attribute shows the number of link test frames that were received at 54 Mbps. |
| RxFrames48 |
| This attribute shows the number of link test frames that were received at 48 Mbps. |
| RxFrames36 |
| This attribute shows the number of link test frames that were received at 36 Mbps. |
| RxFrames24 |
| This attribute shows the number of link test frames that were received at 24 Mbps. |
| RxFrames18 |
| This attribute shows the number of link test frames that were received at 18 Mbps. |
| RxFrames12 |
| This attribute shows the number of link test frames that were received at 12 Mbps. |
| RxFrames11 |
| This attribute shows the number of link test frames that were received at 11 Mbps. |
| RxFrames9 |
| This attribute shows the number of link test frames that were received at 9 Mbps. |
| RxFrames6 |
| This attribute shows the number of link test frames that were received at 6 Mbps. |
| RxFrames5 |
| This attribute shows the number of link test frames that were received at 5.5 Mbps. |
| RxFrames2 |
| This attribute shows the number of link test frames that were received at 2 Mbps. |
| RxFrames1 |
| This attribute shows the number of link test frames that were received at 1 Mbps. |
| Update |
| Writing any non-zero value to this attribute triggers transmission of a new link request frame. Reading this attribute always returns 0. |
| RxFramesRemote54 |
| This attribute shows the number of link test frames that were received by the remote partner at 54 Mbps. |
| RxFramesRemote48 |
| This attribute shows the number of link test frames that were received by the remote partner at 48 Mbps. |
| RxFramesRemote36 |
| This attribute shows the number of link test frames that were received by the remote partner at 36 Mbps. |
| RxFramesRemote24 |
| This attribute shows the number of link test frames that were received by the remote partner at 24 Mbps. |
| RxFramesRemote18 |
| This attribute shows the number of link test frames that were received by the remote partner at 18 Mbps. |
| RxFramesRemote12 |
| This attribute shows the number of link test frames that were received by the remote partner at 12 Mbps. |
| RxFramesRemote11 |
| This attribute shows the number of link test frames that were received by the remote partner at 11 Mbps. |
| RxFramesRemote9 |
| This attribute shows the number of link test frames that were received by the remote partner at 9 Mbps. |
| RxFramesRemote6 |
| This attribute shows the number of link test frames that were received by the remote partner at 6 Mbps. |
| RxFramesRemote5 |
| This attribute shows the number of link test frames that were received by the remote partner at 5.5 Mbps. |
| RxFramesRemote2 |
| This attribute shows the number of link test frames that were received by the remote partner at 2 Mbps. |
| RxFramesRemote1 |
| This attribute shows the number of link test frames that were received by the remote partner at 1 Mbps. |
| IfIndex |
| Auxiliary index in wlanLinkTestTable. |