| WlanIf |
| Wireless card interface index the table belongs. |
| OperatingBands |
| This variable says which bands the wireless card supports. Default is 2.4 and 5 GHZ. Enumerations: - band24 (0)
- band5 (1)
- band58 (2)
|
| AntennaDiversity |
| This variable says which kind of antenna diversity the wireless card supports. Default is none. Enumerations: - none (0)
- rx (1)
- tx (2)
- rx-tx (3)
|
| TxPowerMin |
| The minimal value of the TX power the wireless card supports. Range: 0 to 30 |
| TxPowerMax |
| The maximal value of the TX power the wireless card supports. Range: 0 to 100 |
| TxPowerFixedStepsList |
| This variable shows the available TX Power values in dBm seperated by commas. Length: 0 to 255 |
| FrameCompression |
| This variable says if the wireless card supports frame compression or not. Default is false. Enumerations: |
| FrameConcatenation |
| This variable says if the wireless card supports frame concatination or not. Default is false. Enumerations: |
| PiggybackAck |
| This variable says if the wireless card supports piggyback ACKs or not. Default is false. Enumerations: |
| DirectLink |
| This variable says if the wireless card supports direct links or not. Default is false. Enumerations: |
| LinkDistance |
| This variable says if the wireless card supports a configurable link distance or not. Default is false. Enumerations: |
| ShortRetries |
| This variable says if the wireless card supports the configuration of the short retry value or not. Default is false. Enumerations: |
| LongRetries |
| This variable says if the wireless card supports the configuration of the long retry value or not. Default is false. Enumerations: |
| FragThreshold |
| This variable says if the wireless card supports the configuration of the fragmentation threshold value or not. Default is false. Enumerations: |
| CCAMode |
| This variable says if the wireless card supports the configuration of the CCA mode or not. Default is false. Enumerations: |
| EdThreshold |
| This variable says if the wireless card supports the configuration of the energy detection threshold value or not. Default is false. Enumerations: |
| CWMin |
| This variable says if the wireless card supports the configuration of the minimal contention window or not. Default is false. Enumerations: |
| CWMax |
| This variable says if the wireless card supports the configuration of the maximal contention window or not. Default is false. Enumerations: |
| RxLifetime |
| This variable says if the wireless card supports the configuration of the receive packet lifetime or not. Default is false. Enumerations: |
| TxLifetime |
| This variable says if the wireless card supports the configuration of the transmit packet lifetime or not. Default is false. Enumerations: |
| SkipModes |
| This variable says which modes of the WlanIfSkipChannels the wireless card supports. Default is client24ghz. Enumerations: - ap24ghz (0)
- ap5ghz (1)
- client24ghz (2)
- client5ghz (3)
|
| SupportedModes |
| This variable shows the supported 802.11 modes Enumerations: - dot11a (0)
- dot11b (1)
- dot11g (2)
- dot11n (3)
- dot11ac (4)
- dot11ax (5)
|
| SpatialStreams |
| This variable shows the maximum number of supported spatial streams Range: 1 to 4 |
| BlockAck |
| This attribute, shows the supported Block Ack mechanism. (Immediate Block Ack and Delayed Block Ack) |
| UAPSD |
| This attribute shows if UAPSD is supported by that radio. |
| Bandwidth |
| This attribute reports the bandwidth operation modes, which are supported. |
| ShortGI |
| This attribute, when TRUE, indicates that the Short Guard option is implemented. The default value of this attribute is FALSE. |
| Greenfield |
| This attribute, when TRUE, indicates that the HT Greenfield option is implemented. The default value of this attribute is FALSE. |
| Burst |
| This attribute, when TRUE, indicates that the burst mode is implemented. The default value of this attribute is FALSE. |
| MaxVSS |
| This attribute indicates the maximum number of service sets that may be created per radio module. Range: 0 to 40 |
| MaxWDS |
| This attribute indicates the maximum number of WDS links that may be created per radio module. Range: 0 to 40 |
| MaxClient |
| This attribute indicates the maximum number of client instances that may be created per radio module. Range: 0 to 10 |
| MaxStations |
| Maximum number of stations the station database can hold. Range: 0 to 2048 |
| STBC |
| This attribute indicates that the radio is capable of transmitting or receiving frames using Space-Time Block Code (STBC) option. |
| TxAntSel |
| This attribute indicates which antennas are able to transmit. The actually used antennas can be configured using wlanIfTxAntSel. |
| RxAntSel |
| This attribute indicates which antennas are able to receive. The actually used antennas can be configured using wlanIfRxAntSel. |
| MaxWBLMaster |
| Maximum number of master WLAN bridge links that are supported by the corresponding radio. |
| MaxWBLSlave |
| Maximum number of slave WLAN bridge links that are supported by the corresponding radio. |
| DFS |
| True, if radio supports channels, which require DFS |
| ACSOnBlocker |
| When true, this radio module supports switching to a new channel on presence of a blocking signal. |
| MaxVAP |
| Maximum number of virtual interfaces. Virtual interfaces are VSSs, WBL masters/slaves and clients. |
| RateControl |
| When true, this radio module allows the customization of the non-HT data rates by mean of the 'wlanVSSRateControl' table. |
| RegDomain |
| Regulatory domain used by this radio module |