| StartHour |
| Every day firmware update start time (hour). Range: 0 to 24 |
| StartMinute |
| Every day firmware update start time (minute). Range: 0 to 60 |
| EndHour |
| Every day firmware update end time (hour). Range: 0 to 24 |
| EndMinute |
| Every day firmware update end time (minute). Range: 0 to 60 |
| FileStatus |
| Firmware file status: create(1): new firmware file shall be stored on the device done(2): synchronization of storage device with MIB is done. Enumerations: |
| UploadResult |
| Firmware file upload result (error) code: success(1): the firmware file upload was successful, no-mem-card(2): no memory card plugged in, no-mem-space(3): no more space available on the memory card, incomp-fw-format(4): the firmware file format doesn't match the requirements, transfer-error(5): any transfer error occured during upload, write-protection(6): active write protection on storage device, internal-error(7): unexpected internal error occured. Enumerations: - success (1)
- no-mem-card (2)
- no-mem-space (3)
- incomp-fw-format (4)
- transfer-error (5)
- write-protection (6)
- internal-error (7)
|
| UploadStatus |
| Firmware file upload status: progress(1): firmware file storage on the device is in progress, done(2): firmware file storage on the device and synchronization with MIB is done. Enumerations: |
| RemoteAccessAllowed |
| Allow/block access to the intern FW-UPD Server from extern ISDN. Enumerations: |
| UrlAllowed |
| Allow/block access to extern FW-UPD Server (URL) from intern (e. g. Gigaset Maxwell Series) phone devices. Enumerations: |