>> Table: systemPhoneFwuProcessTable - (.1.3.6.1.4.1.272.4.64.5.3.1)

systemPhoneFwuProcessTable
OID	Name	Type	Access
.1	Index	SystelTerminalIndex	RW
.2	StartNow	ENUM	RW
.3	StartSchedule	ENUM	RW
.4	Status	ENUM	R
.5	Result	ENUM	R
.6	Progress	INTEGER	R
.7	UnknownMsgCounter	Unsigned32	R
.8	TimeoutCounter	Unsigned32	R
.9	AdminStatus	ENUM	D

Index

A reference to the systemPhoneTable (or mpsTerminalTable). Range: 1 to 65535

StartNow

This variable contains the user input in a boolean value to immediately update the firmware of this device. Enumerations: true (1) false (2)

StartSchedule

If this variable is true, the firmwareupdate starts scheduled. The period of firmware updates is defined in systemPhoneFwuServerTable. Enumerations: true (1) false (2)

Status

Status of system phone firmware update: done: there is no firmware update in time running: firmwareupdate is actually running waiting: because lack of system ressources the scheduled or immediately started firmware update is in waiting mode. Enumerations: done (1) running (2) waiting (3)

Result

Result of system phone firmware update: idle: initial value ok: firmware update is successfully completed failed: an error occurred during the firmware update process. Enumerations: idle (1) ok (2) failed (3)

Progress

Progress of system phone firmware update. Range: 0 to 100

UnknownMsgCounter

Statistic value which shows the received unknown messages of internal firmware download server during the firmware update.

TimeoutCounter

Statistic value which shows the occured timeouts during the firmware update.

AdminStatus

In case of elmegIP (gigaset) devices this variable activates (enable) or deactivates (disable) the automatic update function of gigaset devices (introduced by a SIP NOTIFY check-sync). Other systemphones ignore the AdminStatus-value. To delete this mib, value must be set to delete. Enumerations: enable (1) delete (2) disable (3)