| Index |
| Reference to the mpsTerminalTable. Range: 1 to 65535 |
| Fac |
| Facility settings for audio control: out-ringing : Normal ringing tones can be heard on the internal speaker [0] or on the internal speaker and an additional speaker connected to 'audio out' [1]. out-paging : Incomming announcements can be heard on the internal speaker [0] or on the internal speaker and an additional speaker connected to 'audio out' [1]. out-listening : Hands-free listening can be heard on the internal speaker [0] or on the internal speaker and an additional speaker connected to 'audio out' [1]. out-handsfree : Hands-free talking and system call exchange can be heard on the internal speaker [0] or on the internal speaker and an additional speaker connected to 'audio out' [1]. out-answ-mach : Call of messages of anwering machine can be heard on the internal speaker [0] or on the internal speaker and an additional speaker connected to 'audio out' [1]. headset : Setting this bit to [1] enables some automatic headset functions: --> if function keys auto call acceptance AND headset are adjusted AND the user activates the auto call acceptance function key, the headset automatically answer the call --> furthermore, if function keys trunk-line key OR extension key adjusted, pressing such a keys leads to automatically calling via headset handsfree-mute : Enable [1] or disbable [0] mute after handsfree calling. beep-negative-ack : Enable [1] or disbable [0] negative ack beep tone. beep-positive-ack : Enable [1] or disbable [0] positive ack beep tone. beep-call-waiting-repeat : Setting this bit to [0] means that the user is noticed onced. Setting this bit to [1], causes beep-tone of call waiting signal to be repeated. Enumerations: - out-ringing (0)
- out-paging (1)
- out-listening (2)
- out-handsfree (3)
- out-answ-mach (4)
- headset (5)
- handsfree-mute (6)
- beep-negative-ack (7)
- beep-positive-ack (8)
- beep-call-waiting-repeat (9)
|
| HeadsetType |
| The headset type. Value currently only used within the system phone, but must be saved in the PBX. Range: 0 to 255 |
| VolSpeaker |
| Specifies volume setting for telephone speaker. For NG phones range was changed (0 .. 10). Range: 0 to 10 |
| VolHandset |
| Specifies volume setting for telephone handset. Range: 0 to 3 |
| VolCallWaitingBeep |
| Specifies volume setting for call waiting tone. For NG phones range was changed (0 .. 10). Range: 0 to 10 |
| VolDoNotDisturbBeep |
| Specifies volume setting for do not disturb tone. For NG phones range was changed (0 .. 10). Range: 0 to 10 |
| VolAppointedTimeBeep |
| Specifies volume setting for appointed time call tone. Range: 0 to 6 |
| VolNotifyBeep |
| Specifies volume setting for notify beep tone. Range: 0 to 2 |
| VolAnswMachOKBeep |
| Specifies volume setting for answering machine acknowledgement tone. Range: 0 to 2 |
| AdminStatus |
| Just for MIB entry deletion. Enumerations: |
| NGVolHeadset |
| Specifies volume setting for headset. This mib item is only important for NG phones. Range: 0 to 10 |
| NGVolAcknowledgeBeep |
| Specifies volume setting for acknowledgement beep tone. This mib item is only important for NG phones. Range: 0 to 10 |
| NGMicHeadsetResp |
| Specifies responsivity settings for microphone of headset. This mib item is only important for NG phones. Range: 1 to 7 |