>> Table: pimNeighborTable - (.1.3.6.1.4.1.272.4.5.54.2.1.2.1)

pimNeighborTable
OID	Name	Type	Access
.1	IfIndex	InterfaceIndex	R
.2	AddressType	ENUM	R
.3	Address	InetAddressIPv6	R
.4	UpTime	TimeTicks	R
.5	ExpiryTime	TimeTicks	R
.6	LanPruneDelayPresent	ENUM	R
.7	PropagationDelay	Unsigned32	R
.8	OverrideInterval	Unsigned32	R
.9	TBit	ENUM	R
.10	GenerationIDPresent	ENUM	R
.11	GenerationIDValue	Unsigned32	R
.12	BidirCapable	ENUM	R
.13	DRPriorityPresent	ENUM	R
.14	DRPriority	Unsigned32	R
.15	SRCapable	ENUM	R

IfIndex

The value of ifIndex for the interface used to reach this PIM neighbor. Range: 1 to 2147483647

AddressType

The address type of this PIM neighbor. Enumerations: unknown (0) ipv4 (1) ipv6 (2) ipv4z (3) ipv6z (4) dns (16)

Address

The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNeighborAddressType object. Length: 16 to 16

UpTime

The time since this PIM neighbor (last) became a neighbor of the local router.

ExpiryTime

The minimum time remaining before this PIM neighbor will be aged out. The value zero indicates that this PIM neighbor will never be aged out.

LanPruneDelayPresent

Evaluates to TRUE if this neighbor is using the LAN Prune Delay option. Enumerations: true (1) false (2)

PropagationDelay

The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor. This object is always zero if pimNeighborLanPruneDelayPresent is FALSE. Range: 0 to 32767

OverrideInterval

The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor. This object is always zero if pimNeighborLanPruneDelayPresent is FALSE. Range: 0 to 65535

TBit

Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppression. This object is always TRUE if pimNeighborLanPruneDelayPresent is FALSE. Enumerations: true (1) false (2)

GenerationIDPresent

Evaluates to TRUE if this neighbor is using the Generation ID option. Enumerations: true (1) false (2)

GenerationIDValue

The value of the Generation ID from the last PIM Hello message received from this neighbor. This object is always zero if pimNeighborGenerationIDPresent is FALSE.

BidirCapable

Evaluates to TRUE if this neighbor is using the Bidirectional-PIM Capable option. Enumerations: true (1) false (2)

DRPriorityPresent

Evaluates to TRUE if this neighbor is using the DR Priority option. Enumerations: true (1) false (2)

DRPriority

The value of the Designated Router Priority from the last PIM Hello message received from this neighbor. This object is always zero if pimNeighborDRPriorityPresent is FALSE.

SRCapable

Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM. Enumerations: true (1) false (2)