| AreaId |
| A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| AuthType |
| The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. ** not used - see ospfIfAuthType ** Range: 0 to 255 |
| ImportAsExtern |
| The area's support for importing AS external link- state advertisements. Enumerations: - importExternal (1)
- importNoExternal (2)
- importNssa (3)
|
| SpfRuns |
| The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm. |
| AreaBdrRtrCount |
| The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| AsBdrRtrCount |
| The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| AreaLsaCount |
| The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| AreaLsaCksumSum |
| The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. Range: 0 to -1 |
| AreaSummary |
| The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs. Enumerations: - noAreaSummary (1)
- sendAreaSummary (2)
|
| AreaStatus |
| This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. Enumerations: |
| AreaLSAOriginateDelay |
| The variable ospfAreaLSAOriginateDelay controls the origination of LSA for RADIUS-DialUp connections. It has no effect on other areas. The unit of the value of this variable is 1/100 seconds, the range lies between 0 and 500 miliseconds and the default value is 0. If it is greater then 0, then the origination of LSA will be delayed for this time. This period of time is necessary, when the RADIUS-Dialup connection generates more then one (Host-)Route. Range: 0 to 500 |