FEC - MIB - Management Information Base

>> MIB - Management Information Base

>> Table: mpsTerminalCmdTable - (.1.3.6.1.4.1.272.4.53.14.4.1)

Description: The mpsTerminalCmdTable is used to trigger OpenStage provisioning actions at OpenStage phones.

Creating entries: Entries are added to this table by assigning a value of the mpsTerminalCmd and mpsTerminalCmdMacAddress.

Deleting Entries: Entries are removed by the ost application after the requested command has been performed and a new command for the same Teminal (same mpsTerminalCmdMacAddress) is present.

mpsTerminalCmdTable
OID Name Type Access
.1 MacAddress MacAddress RW

.2 Cmd ENUM RW

.3 State ENUM R

MacAddress
The MAC Address of the OpenStage Phone. Reference to mpsTerminalStatusTable MacAddress.
Length: 6 to 6

Cmd
Command for configuration handling. Possible values are : none(1) -> default value. fw-update(2) -> new firmware file shall be stored on the device. reset-passwd(3) -> set admin password to default on the device. reset-upasswd(4) -> set user password to default on the device. start-registration(5) -> start dect registration for 300 seconds on the device.
Enumerations:
none (1)
fw-update (2)
reset-passwd (3)
reset-upasswd (4)
start-registration (5)

State
The state of this command (i.e., mpsTerminalStatusCmd).
todo(1) : the command will start soon running(2) : the command is currently executing done(3) : the command has successfully completed error(4) : the command has failed
Enumerations:
todo (1)
running (2)
done (3)
error (4)