| Country |
| This variable contains the country code settings of the PBX, e.g. change CLIP information at calls to exter, change impedance settings at internal analogue ports. Enumerations: - germany (1)
- netherlands (2)
- united-kindom (3)
- belgium (4)
- italy (5)
- denmark (6)
- spain (7)
- sweden (8)
- norway (9)
- france (10)
- portugal (11)
- austria (12)
- switzerland (13)
- czech (14)
- slovenia (15)
- poland (16)
- hungary (17)
- greece (18)
|
| SetExchangeDate |
| Accept time and date is off, acceppt from exchange or accept from time server. Enumerations: - no (1)
- pbx (2)
- time-server (3)
|
| Facilities |
| System facilities: highRingerFrequency: a/b extension ringing frequency (0=50 Hz, 1=25 Hz) handoverBusyExtension: This value determines if handover to busy extension is possible handoverBusyMusicOnHold:This value determines if the caller hears tone or MoH connExtExt: Two external subscribers are to be connected after hang up. Enumerations: - highRingerFrequency (0)
- handoverBusyExtension (1)
- handoverBusyMusicOnHold (2)
- connExtExt (3)
|
| AreaCode |
| This variable contains the digits for the area code (national number, e.g. '5171'). Length: 0 to 10 |
| CountryCode |
| This variable contains the digits for the country code (international number, e.g '49'). Length: 0 to 6 |
| CodeInternationalPrefix |
| This variable contains the digits for international prefix code. Length: 0 to 2 |
| CodeNationalPrefix |
| This variable contains the digit for national prefix code. Length: 0 to 1 |
| CityCode |
| This variable contains the digit for the city code prefix. Extension with dial authorisation = 'local' can only dial numbers with this prefix. Length: 0 to 8 |
| Language |
| This variable contains the language code setting, e.g for system provided menue. Enumerations: - german (1)
- english (3)
- italian (5)
|
| DefaultTargetType |
| This variable contains the default target type of system, if no incoming external call distribution match. 'off' means busy signalling to external subscriber. Enumerations: - group (1)
- extension (2)
- none (3)
|
| DefaultTargetIndex |
| This variable contains index of the target table or zero (busy signalling), mpsSysConfigDefaultTargetType=group : index = mpsGroupIndex. mpsSysConfigDefaultTargetType=extension : index = ExtensionIndex. Range: 0 to 65535 |
| ExtMoHVolume |
| This variable contains the volume adjustment level for the external MoH played back via the audio-in jack (approximately in 3 dB steps): negative values -> attenuate during playback 0 -> original playback positive values -> amplify during playback Range: -5 to 3 |
| PreselectionCode |
| This variable contains the digits for system preselection (call-by-call). Length: 0 to 10 |