| Index |
| A unique value for additional analog extension settings. Range: 1 to 65535 |
| Mode |
| You can configure each analog port to accept a different terminal device. Additional settings or special functions may be required depending on the type of terminal device. Terminal device types which require special functions / applications can be set at some analog connections. Set to delete, to discard the whole entry. Enumerations: - none (1)
- telephone (2)
- fax (3)
- answering-machine (4)
- modem (5)
- multi-port (6)
- moh (7)
- tfe-123d12 (8)
- tfe-other (9)
- tfe-doorline (10)
- announcement (11)
- voice-mail-system (12)
- alarm-line (13)
- tfe-adapter (14)
- moh-anouncement (15)
- tfe-123d12-4bells (16)
- tfe-others-4bells (17)
- gateway (18)
|
| GatewayNumber |
| This variable contains the gateway number, if mpsExtensionABMode=gateway. |
| DialingType |
| Type of dialling, DTMF and pulse dialing. Enumerations: |
| ChargePulse |
| If your analog terminal devices support the display of cost and charge information you can set the transmission of charge pulses at the corresponding connections. Enumerations: |
| Clip |
| Number display (CLIP). Enumerations: |
| ClipOffHook |
| Number display (CLIP off Hook). Enumerations: |
| Cnip |
| Name display (CNIP). Enumerations: |
| FlashTime |
| This variable contains the analogue flash time in milliseconds. Enumerations: - m100 (1)
- m200 (2)
- m300 (3)
- m400 (4)
- m500 (5)
- m600 (6)
- m700 (7)
- m800 (8)
- m900 (9)
- m1000 (10)
|
| DoorIntercom |
| This variable contains the number of the door intercom. Range: 0 to 10 |
| DoorIntercomTimer |
| This variable contains the length of timer in seconds for open door. |
| AdminStatus |
| Jsut for delete. Enumerations: |