>> Table: mpsDoorIntercomModeTable - (.1.3.6.1.4.1.272.4.53.7.4.1)

mpsDoorIntercomModeTable
OID	Name	Type	Access
.1	Index	DoorIntercomIndex	RW
.2	Button	DoorButtonIndex	RW
.3	Number	DoorIntercomModeIndex	RW
.4	Handling	ENUM	RW
.5	Assignment	ENUM	RW
.6	ExtNumber	DisplayString	RW
.7	AdminStatus	ENUM	D

Index

A unique value for each door intercom. Reference to mpsDoorIntercomIndex. Range: 1 to 10

Button

A unique value for each button of a door intercom. Reference to mpsDoorIntercomSourceButtonIndex. Range: 1 to 4

Number

For each door intercom a variant. Reference to mpsDoorIntercomUserMode. Range: 1 to 10

Handling

Signalling mode (internal) of the door intercom group: simultaneous: all assigned terminals are called simultaneously linear : all assigned terminals are called in the sequence of their entry in configuration. rotating : this call is a special case of the linear call. After all terminals are called, call signalling begins again with the first entered terminal. adding : the terminals are called in the sequence of their entry in the subscriber list. Every terminal that has already been called is called again, until all entered terminals are called. linear-ext : linear + after defined times have run out, all team subscribers can be called in parallel. rotating-ext: rotating + after defined times have run out, all team subscribers can be called in parallel. Enumerations: simultaneous (1) linear (2) rotating (3) adding (4) linear-ext (5) rotating-ext (6)

Assignment

Door intercom group member are internal or one external number. Enumerations: internal (1) external (2)

ExtNumber

This external number will be called, if mpsDoorIntercomModeAssignment = external. Length: 0 to 20

AdminStatus

Just for MIB entry deletion. Enumerations: enable (1) delete (2)