>> MIB - Management Information Base

>> Table: mpsDeviceTable - (.1.3.6.1.4.1.272.4.53.3.1.1)

Description: This table contains information about each call control interface (device internal and external).

mpsDeviceTable
OIDNameTypeAccess
.1IfIndexInterfaceIndexRW
.2ModeENUMRW
.3DisplayNameDisplayStringRW
.4BundleINTEGERRW
.5TrunkGroupTrunkGroupIndexOrZeroRW
.6DefaultExtensionExtensionIndexOrZeroRW
.7BusModeENUMRW
.8ClipNoScreeningENUMRW
.9AdminStatusENUMD
.10Layer2AlwaysOnENUMRW
.11TypeENUMRW

IfIndex
A unique value for each device.

Range: 1 to 2147483647

Mode
Contains mode of the device. itrunk-pmp(2) : isdn extern, point-to-multipoint itrunk-pp(3) : isdn extern, point-to-point iline-pmp(4) : isdn intern, point-to-multipoint iline-pp(5) : isdn intern, point-to-point analine(6) : analoque intern, FXS itrunk-pp-S2m(7): isdn extern, primary rate interfaces dectline(8) : dect intern anatrunk(9) : analoque extern, FXO

Enumerations:

  • none (1)
  • itrunk-pmp (2)
  • itrunk-pp (3)
  • iline-pmp (4)
  • iline-pp (5)
  • analine (6)
  • itrunk-pp-S2m (7)
  • dectline (8)
  • anatrunk (9)
DisplayName
Display name of the device.

Length: 0 to 32

Bundle
This variable contains the bundle number of the device.
TrunkGroup
A unique value for each trunk group index (reference to mpsTrunkGroupTable).

Range: 0 to 65535

DefaultExtension
Defines the extension to be used for outgoing calls without calling party number (reference to mpsExtensionTable).

Range: 0 to 65535

BusMode
The configuration of the internal isdn device port is standard(1) or extended(2)

Enumerations:

  • standard (1)
  • extended (2)
ClipNoScreening
This value determine when the mpsDeviceMode = itrunk-pp, wether ClipNoScreening is disabled(1) or individual(2) or global(3).

Enumerations:

  • no (1)
  • individual (2)
  • global (3)
AdminStatus
Just for MIB entry deletion.

Enumerations:

  • enable (1)
  • delete (2)
  • disable (3)
Layer2AlwaysOn
This value determine if the Layer2 for this external isdn port is keept permanently active (true) or not (false).

Enumerations:

  • true (1)
  • false (2)
Type
Set to 'tdm' for physical interfaces (isdn, pots) and set to 'ip' or 'capi' for virtual interfaces.

Enumerations:

  • tdm (1)
  • ip (2)
  • capi (3)


MIB Reference to Software Version 10.2.12 generated on 2023/08/29. Provided by webmaster@bintec-elmeg.com
Copyright ©2023 by bintec elmeg GmbH