>> Table: mobileAdmOperatorTable - (.1.3.6.1.4.1.272.4.41.4.1.30.1)

mobileAdmOperatorTable
OID	Name	Type	Access
.1	IccId	DisplayString	RW
.2	Code	Unsigned32	RW
.3	Name	DisplayString	RW
.4	AcT	BITS	RW
.5	Priority	INTEGER	RW
.6	Status	ENUM	D

IccId

The ICC-ID of the SIM-Card. The operator is assigned to this SIM Id. Length: 0 to 20

Code

The PLMN Code is built from a 3 digit MCC (Mobile Country Code) and 2 or 3 digit MNC (Mobile Network Code).

Name

The name of the network operator. Length: 0 to 40

AcT

The AcT defines the Access technologies gsm - G2 connectivity umts - G3 connectivity lte - G4 connectivity Enumerations: gsm (1) umts (2) lte (3)

Priority

This value represents the relative priority of this entry. it is added to the admistrative base priority (see 'mobileOperatorPriority') to be used afterwards for the operator selection procedure. Under normal circumstances it's intended that this resulting priority is higher than the priority values associated with the priviledged and preferred operators read from SIM card.

Status

The operator's status. permit - the operator is allowed for roaming. deny - the operator is forbidden to use. delete - delete this entry Enumerations: permit (1) deny (2) delete (8)