FEC - MIB - Management Information Base

>> MIB - Management Information Base

>> Table: isdnDChanX31Table - (.1.3.6.1.4.1.272.4.2.6.1)

Description: The isdnDChanX31Table contains information for the X.31 stack for each available ISDN D-channel. This information is mainly used for X.25 packet-switching functions but can be used for CAPI applications. The table is initialized during the auto configure process. By default the system polls each D-channel for an assigned TEI (terminal endpoint identifier).

Creating entries: Entries can be added by assigning a new value (valid IfIndex) to isdnX31IsdnIfIndex.

Deleting entries: Entries are removed by assigning 'delete' to the approprate isdnX31IsdnAssignedTo object.

isdnDChanX31Table
OID Name Type Access
.1 IsdnIfIndex INTEGER RW

.2 TeiProc ENUM RW

.3 TeiValue INTEGER RW

.5 AssignedTo ENUM D

.6 IsdnPTIfIndex INTEGER RW

IsdnIfIndex
The corresponding ISDN interface that is used for this call. Refer to the isdnIfTable.
TeiProc
The procedure used for polling of TEI (terminal end-point identifiers) values.
Enumerations:
auto (1)
fixed (2)

TeiValue
The TEI value for this interface.
Range: -1 to 126

AssignedTo
The service this TEI value is assigned to.
Enumerations:
packet-switch (1)
capi-default (2)
capi (3)
delete (4)
pass-through (5)

IsdnPTIfIndex
The corresponding ISDN interface that is used as destination for this call in case variable isdnX31AssignedTo contains value pass-through. Refer to isdnIfTable.