>> MIB - Management Information Base

>> Table: ipDropinIfTable - (.1.3.6.1.4.1.272.4.5.65.1)

Description: .

ipDropinIfTable
OIDNameTypeAccess
.1IndexINTEGERRW
.2DescrDisplayStringRW
.3GroupINTEGERRW
.4AdminStatusENUMD
.5ExcludeFromNatENUMRW

Index
Index of interface to be associated with drop-in group.
Descr
A textual string describing this IP drop-in interface.

Length: 0 to 255

Group
Associated drop-in group.
AdminStatus
Administrative status in order to switch on/off the drop-in mode for the interface.

Enumerations:

  • enabled (1)
  • disabled (2)
  • delete (3)
ExcludeFromNat
This variable determines, in conjunction with the variable 'ipDropinGroupExcludeFromNat', whether the NAT procedure is bypassed for IP addresses (source or target) within the drop-in network - with exception of the address 'ipDropinGroupUsedLocalAddr' itself. If set to enabled (2) NAT-less communication initiated from or addressed to the drop-in network is possible, needed for non-private DMZ networks for example.

Enumerations:

  • disabled (1)
  • enabled (2)


MIB Reference to Software Version 10.2.12 generated on 2023/08/29. Provided by webmaster@bintec-elmeg.com
Copyright ©2023 by bintec elmeg GmbH