>> MIB - Management Information Base

>> Table: ip6AdmRouteTable - (.1.3.6.1.4.1.272.4.5.100.1.5.1)

Description: A administrative routing entry.

ip6AdmRouteTable
OIDNameTypeAccess
.1TargetInetAddressIPv6RW
.2TargetLenINTEGERRW
.3SourceInetAddressIPv6RW
.4SourceLenINTEGERRW
.5IfIndexInterfaceIndexRW
.6NextHopInetAddressIPv6RW
.7AdminStatusENUMD
.8PriorityINTEGERRW
.9DescrDisplayStringRW

Target
The destination IPv6 address of this route. This object may not take a Multicast address value.

Length: 16 to 16

TargetLen
Indicates the prefix length of the destination address.

Range: 0 to 128

Source
The Source IPv6 address of this route. This object may not take a Multicast address value.

Length: 16 to 16

SourceLen
Indicates the prefix length of the source address.

Range: 0 to 128

IfIndex
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ip6DeviceIfIndex. For routes of the discard type this value can be zero.

Range: 1 to 2147483647

NextHop
On remote routes, the address of the next hop, otherwise set to ::

Length: 16 to 16

AdminStatus
The administrative status of this routing entry.

Enumerations:

  • enable (1)
  • disable (2)
  • delete (3)
Priority
The routing priority for this route, a value of 0 means highest priority, a value of 16 lowest priority.

Range: 0 to 16

Descr
User defined description of this routing entry

Length: 0 to 255


MIB Reference to Software Version 10.2.12 generated on 2023/08/29. Provided by webmaster@bintec-elmeg.com
Copyright ©2023 by bintec elmeg GmbH