| Status |
| This object shows the current status of IGMP. It may be used to turn on or off IGMP. If set to auto IGMP will create host-only interfaces automatically as soon as applications request it. Enumerations: |
| Mode |
| This object show the current operation mode of IGMP. With compat IGMP runs in compatibility mode, accepting IGMP v1,v2,v3 packets. Running in v3only mode, only IGMP v3 packets are accepted. Enumerations: |
| MaxGroups |
| This object specifies the maximum number of groups. Range: 1 to 65535 |
| MaxSources |
| This object specifies the maximum number of sources. Range: 1 to 65535 |
| StateLimit |
| The maximum allowed number of Reports/Queries per seconds globally on a router. Must be greater zero to be active. Range: 0 to 65535 |
| Logging |
| This object might be used to define the behaviour of generated syslog messages: off - be quiet normal - critical error messages are generated verbose - creates messages about what IGMP is currently doing Enumerations: - off (0)
- normal (1)
- verbose (2)
|
| ToS |
| Specifies value of 'Type of Service' octet stored in IP-header (see section 3.1 of RFC-791) for outgoing IGMP-frames (queries/reports). (Default-value is 0xC0 as proposed in section 4 of RFC-3376.) Range: 0 to 255 |
| McastToUcast |
| Enables or disables layer 2 IGMP Multicast to Unicast conversion - necessary to suppress multicast flooding on LAN switch ports not involved. Enumerations: |