| IfIndex |
| The correlating PPP interface index. |
| Type |
| The dialup type can be set to plain isdn(1), isdn-spv(2) semi-permanent links used by the German 1TR6 D-channel protocol, or to delete(3) to delete a biboDialTable entry. The types ppp-callback(4) and ppp-negotiated(5) are used for the LCP callback option. Enumerations: - isdn (1)
- isdn-spv (2)
- delete (3)
- ppp-callback (4)
- ppp-negotiated (5)
- x25-dialout (6)
- ip (7)
- x25 (8)
|
| Direction |
| The allowed dial direction is either incoming(1), outgoing(2), or both(3) calls. No call is ever set up when set to incoming(1). Incoming calls will not be identified when set to outoing(2). Furthermore, once PPP authentication succeeds and there is at least one incoming number defined but for which none matches, the call will not be accepted for security reasons. Enumerations: - incoming (1)
- outgoing (2)
- both (3)
|
| Number |
| The defined dialing number. Used for either dialing or comparing to incoming calls or both, depending on the content of the biboDialDirection field. The wildcards '*', '?', '[', ']', '{', '}' may be used. Length: 0 to 63 |
| Subaddress |
| The defined dial subaddress, if any. Also, see the biboDialNumber field. |
| ClosedUserGroup |
| The defined closed user group, if any. Also, see the biboDialNumber field. Range: 0 to 9999 |
| StkMask |
| The defined stack mask. Each value of IsdnStkNumber represents a bit in this bitmask. A mask of 0 disables dialup completely, while a mask of -1 enables dialup on all available ISDN stacks. Range: 0 to -1 |
| Screening |
| The screening indicator of the biboDialNumber. The biboDialScreening field can be used to gauge the `trustworthiness' of the biboDialNumber field. (See isdnCallScreening) Indicators are ordered from highest to lowest as follows: indicator: CPN assigned: verification: `network' by network none `user-verified' by user verification successful `user' by user none `user-failed' by user verification failed Set this field to `dont-care' to accept all calls. Otherwise calls are accepted only if the screening indicator matches or is higher than the set value. Enumerations: - user (1)
- user-verified (2)
- user-failed (3)
- network (4)
- dont-care (5)
|
| CallingSubaddress |
| The defined calling dial subaddress, if any. Also, see the biboDialNumber field. |
| TypeOfCallingSubAdd |
| The type of calling party subaddress. Enumerations: - nsap (1)
- user-specified (2)
- reserved (3)
|
| TypeOfCalledSubAdd |
| The type of called party subaddress. Enumerations: - nsap (1)
- user-specified (2)
- reserved (3)
|
| LocalNumber |
| The defined local dialing number. Used as originator address in the case of an outgoing calling and is checked against the destination address in the case of an incoming call. The wildcards '*', '?', '[', ']', '{', '}' may be used. Length: 0 to 63 |
| TypeOfLocalNumber |
| The type of local number (biboDialLocalNumber) upon outgoing calls according to ETS 300 102-1. Possible values are: unknown(1), international-number(2), national-number(3), network-specific-number(4), subscriber-number(5) Default value is unknown. Enumerations: - unknown (1)
- international-number (2)
- national-number (3)
- network-specific-number (4)
- subscriber-number (5)
|
| OutNumTranslation |
| If DialOutNumTranslation is disabled, the number will be passed to the lower layers without modification. Enumerations: |