>> Table: atmOamTable - (.1.3.6.1.4.1.272.4.16.13.1)

atmOamTable
OID	Name	Type	Access
.1	AtmIfIndex	Integer32	RW
.2	Vpi	INTEGER	RW
.3	Vci	INTEGER	RW
.4	FlowLevel	ENUM	D
.5	LoopbackEnd2End	ENUM	RW
.6	LoopbackSegment	ENUM	RW
.7	LoopbackEnd2EndInterval	INTEGER	RW
.8	LoopbackSegmentInterval	INTEGER	RW
.9	LoopbackEnd2EndMaxPending	INTEGER	RW
.10	LoopbackSegmentMaxPending	INTEGER	RW
.11	CCEnd2EndActivation	ENUM	RW
.12	CCSegmentActivation	ENUM	RW
.13	CCEnd2EndDirection	ENUM	RW
.14	CCSegmentDirection	ENUM	RW

AtmIfIndex

The interface index of the associated ATM hardware.

Vpi

The VPI value of this Virtual Path/Channel Connection. Range: 0 to 255

Vci

The VCI value of this Virtual Channel Connection. Range: 0 to 65535

FlowLevel

The OAM hierarchical flow levels : VC (F5) or VP (F4). Enumerations: f5 (1) f4 (2) delete (10)

LoopbackEnd2End

Indicates wether OAM loopback is enabled onto the end-to-end connection. Enumerations: disabled (1) enabled (2)

LoopbackSegment

Indicates wether active OAM loopback is enabled onto the segment connection. Enumerations: disabled (1) enabled (2)

LoopbackEnd2EndInterval

OAM loopback transmit interval (in seconds) for end-to-end context. Range: 0 to 999

LoopbackSegmentInterval

OAM loopback transmit interval (in seconds) for segment context. Range: 0 to 999

LoopbackEnd2EndMaxPending

Specifies the maximum number of outstanding OAM loopback responses after which the associated F4/F5 instance will be set into the end-to-end operational down status. Range: 0 to 999

LoopbackSegmentMaxPending

Specifies the maximum number of outstanding OAM loopback responses after which the associated F4/F5 instance will be set into the segment operational down status. Range: 0 to 999

CCEnd2EndActivation

Determines wether OAM continuity check activation request will be activated and/or accepted for the associated end-to-end connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to active(2) or both CC will be requested. If set to no-negotiation(4) - depending on the settings in atmOamCCEnd2EndDirection - CC cells will be send and/or expected periodically without any previous CC activation negotiation. If set to none(5) neither CC activation will be requested/confirmed nor any CC cells will be generated/expected. Enumerations: passive (1) active (2) both (3) no-negotiation (4) none (5)

CCSegmentActivation

Determines wether OAM continuity check activation request will be activated and/or accepted for the associated segment connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to active(2) or both CC will be requested. If set to no-negotiation(4) - depending on the settings in atmOamCCSegmentDirection - CC cells will be send and/or expected periodically without any previous CC activation negotiation. If set to none(5) neither CC activation will be requested/confirmed nor any CC cells will be generated/expected. Enumerations: passive (1) active (2) both (3) no-negotiation (4) none (5)

CCEnd2EndDirection

Determines OAM continuity check direction (for end-to-end). If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from the source as well as send to the sink. Enumerations: sink (1) source (2) both (3) none (4)

CCSegmentDirection

Determines OAM continuity check direction (for segment). If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from the source as well as send to the sink. Enumerations: sink (1) source (2) both (3) none (4)