>> Table: adslAturChanTable - (.1.3.6.1.4.1.272.4.30.1.1.5.1)

adslAturChanTable
OID	Name	Type	Access
.1	IfIndex	INTEGER	R
.2	InterleaveDelay	INTEGER	R
.3	CurrTxRate	INTEGER	R
.4	PrevTxRate	INTEGER	R
.5	CrcBlockLength	INTEGER	R
.6	InterleaveDepth	INTEGER	R

IfIndex

Specifies the ADSL interface index.

InterleaveDelay

Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject.

CurrTxRate

Actual transmit rate on this channel.

PrevTxRate

The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh(*)RateDown or less than adslAturThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry.

CrcBlockLength

Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.

InterleaveDepth

The interleaver depth.