Enabling of BRRP configuration

After creating the virtual routers on both bintec RT1202™ gateways, the BRRP function is then enabled. For this, go to the following menu:

  1. Go to Routing -> BRRP -> Options.

Routing -> BRRP -> Options

Proceed as follows:

  1. Enable the Enable BRRP function.

  2. Confirm with OK.

The gateway with the higher priority is now in master status, and the gateway with the lower priority is now in backup status. You will see the configuration of the master gateway in the following menu:

  1. Go to Routing -> BRRP -> Virtual Routers.

Routing -> BRRP -> Virtual Routers

The following messages can be seen in the syslog:

Copyright© Version 01/2020 bintec elmeg GmbH