Monthly configuration backup |
You want to backup your configuration on the first day of every month on a TFTP server.
Go to the following menu for this:
Go to Local Services -> Scheduling -> Time Schedule-> New.
Local Services -> Scheduling-> Time Schedule-> New
Relevant fields in the Time Schedule menu
Field | Meaning |
---|---|
Description | Give the entry a name. |
Select action | Select the action you want the gateway to execute. |
TFTP Server | Enter the IP address of the TFTP server. |
TFTP File Name | Enter the name of the configuration on the server. |
Condition Type | Select the frequency with which the action is to be executed. |
Condition Settings | Select the day on which the action is to be executed. |
Start Time | Specify the time at which the action is to be executed. |
Stop Time | Specify the time at which the action is to be terminated. |
Proceed as follows:
Under Description enter Configuration .
Under Select Action select Trigger Configuration Backup .
Enter the IP address in the TFTP Server field, e.g. 192.168.0.2 .
Enter a name under TFTP File Name, e.g. r232bw.cfg .
Select the Condition Type Day of Month .
In the Condition Settings field select 1 .
Enter the time under Start Time: Hour 00 Minute 00 .
Enter the time under Stop Time: Hour 00 Minute 05 .
Confirm with OK.
![]() |
Note |
---|---|
A monthly configuration backup requires an appropriately configured TFTP server. |
The TFTP server is used to transfer files between gateway and computer, e.g. for configuration management. Make sure that the TFTP server is operating properly by opening DIME Tools™ (included in the BRICKware™, which you can install from the bintec Companion CD™). Start the TFTP server by pressing the key combination CTRL + T in DIME Tools™.
DIME Tools - TFTP Server
To assign the TFTP server a directory, e.g. for saving files, you can enter your chosen path under Configuration -> TFTP Server.
Copyright© Version 01/2020 bintec elmeg GmbH |