Introduction |
This chapter describes VPN IPSec connection of the bintec secure IPSec clients™ to a bintec R3000™ VPN gateway with advanced authentication (XAuth) on Microsoft Windows 2003 RADIUS server. A double authentication is performed at VPN tunnel setup. The VPN IPSec client authenticates itself per preshared key at the VPN gateway; in addition, user login is performed over Windows 2003 server. The VPN IPSec client is subsequently assigned a dynamic private IP address (per IKE config mode) from the local network.
Example scenario
The following are required for the configuration:
A VPN gateway e.g. bintec R3000™ with system software 7.8.7 (XAuth support)
A bintec secure IPSec client™
A Microsoft Windows 2003 Server with installed Internet Authentication Service (IAS)
VPN gateway and VPN client each require an independent Internet connection
Copyright© Version 01/2020 bintec elmeg GmbH |