Configuration of the VPN gateway

A dynamic IP address is assigned to the bintec Secure IPSec Client™ when establishing the VPN IPSec connection. An IP address pool is created for this purpose. To do this, go to the following menu:

Go to VPN -> IPSec -> IP Pools -> Add.

VPN -> IPSec -> IP Pools -> Add

Proceed as follows to set up an IP pool:

Enter the name of the IP pool under IP Pool Name, e.g. IPSec Pool .
In our example for VPN IPSec Client connections, the addresses 192.168.20.1 to 192.168.20.10 are assigned for IP Pool Range.
Confirm with OK.