Overview of configuration steps |
Licence for IP address transfer over ISDN
Field | Menu | Value |
---|---|---|
Licence Serial Number | System Management -> Global Settings-> System Licenses -> New | Serial number |
Licence Key | System Management -> Global Settings-> System Licenses -> New | Licence Key |
Field | Menu | Value |
---|---|---|
ISDN Port | Physical Interfaces -> ISDN Ports-> MSN Configuration -> New | e.g. bri-0 |
Service | Physical Interfaces -> ISDN Ports-> MSN Configuration -> New | IPSec |
MSN | Physical Interfaces -> ISDN Ports-> MSN Configuration -> New | e.g. 840 |
MSN Recognition | Physical Interfaces -> ISDN Ports-> MSN Configuration -> New | Right to Left |
Bearer Service | Physical Interfaces -> ISDN Ports-> MSN Configuration -> New | Data + Voice |
Field | Menu | Value |
---|---|---|
Description | WAN -> Internet + Dialup -> PPPoE -> New | e.g. T-Online |
PPPoE ethernet interface | WAN -> Internet + Dialup -> PPPoE -> New | ethoa50-0 |
User Name | WAN -> Internet + Dialup -> PPPoE -> New | Your user name, e.g. t-online.de |
Password | WAN -> Internet + Dialup -> PPPoE -> New | Your password |
Always on (flat-rate mode) | WAN -> Internet + Dialup -> PPPoE -> New | Disabled |
IP address mode | WAN -> Internet + Dialup -> PPPoE -> New | Get IP Address |
Default Route | WAN -> Internet + Dialup -> PPPoE -> New | Enabled |
Create NAT entry | WAN -> Internet + Dialup -> PPPoE -> New | Enabled |
Field | Menu | Value |
---|---|---|
Description | VPN -> IPSec ->IPSec Peers -> New | e.g. rs232bw_branchoffice |
Peer ID | VPN -> IPSec ->IPSec Peers -> New | e.g. IPV4 Address and 192.168.0.254 |
Preshared Key | VPN -> IPSec ->IPSec Peers -> New | e.g. secret123 |
Default Route | VPN -> IPSec ->IPSec Peers -> New | Disabled |
Local IP Address | VPN -> IPSec ->IPSec Peers -> New | e.g. 192.168.1.254 |
Route Entries | VPN -> IPSec ->IPSec Peers -> New | e.g. for IP Address 192.168.0.0 and for Netmask 255.255.255.0 |
Mode | VPN -> IPSec ->IPSec Peers-> New -> Advanced Settings | Both |
Incoming ISDN Number | VPN -> IPSec ->IPSec Peers-> New -> Advanced Settings | e.g. 850 |
Outgoing ISDN Number | VPN -> IPSec ->IPSec Peers-> New -> Advanced Settings | e.g. 850 |
Transfer own IP address over ISDN | VPN -> IPSec ->IPSec Peers-> New -> Advanced Settings | Enabled |
Transfer Mode | VPN -> IPSec ->IPSec Peers-> New -> Advanced Settings | e.g. Autodetect Best Mode |
Description |
VPN -> IPSec ->
Phase-1 Profiles-> <Multi-Proposal>
->
![]() |
e.g. Phase1 PSK |
Proposal |
VPN -> IPSec ->
Phase-1 Profiles-> <Multi-Proposal>
->
![]() |
e.g. 3DES and SHA1 |
DH Group |
VPN -> IPSec ->
Phase-1 Profiles-> <Multi-Proposal>
->
![]() |
e.g. 2(1024 Bit) |
Lifetime |
VPN -> IPSec ->
Phase-1 Profiles-> <Multi-Proposal>
->
![]() |
e.g. 28800 and 0 |
Authentication Method |
VPN -> IPSec ->
Phase-1 Profiles-> <Multi-Proposal>
->
![]() |
Preshared Keys |
Mode |
VPN -> IPSec ->
Phase-1 Profiles-> <Multi-Proposal>
->
![]() |
Aggressive |
Local ID Type |
VPN -> IPSec ->
Phase-1 Profiles-> <Multi-Proposal>
->
![]() |
e.g. IPV4 Address |
Local ID Value |
VPN -> IPSec ->
Phase-1 Profiles-> <Multi-Proposal>
->
![]() |
e.g. 192.168.1.254 |
Alive Check |
VPN -> IPSec
->Phase-1 Profiles -> <Multi-Proposal>
->
![]() |
Inactive |
NAT Traversal |
VPN -> IPSec
->Phase-1 Profiles -> <Multi-Proposal>
->
![]() |
Disabled |
Description |
VPN -> IPSec ->
Phase-2 Profiles-> <Multi-Proposal>
->
![]() |
e.g. Phase2 |
Proposal |
VPN -> IPSec ->
Phase-2 Profiles-> <Multi-Proposal>
->
![]() |
e.g. 3DES and SHA1 |
Use PFS Group |
VPN -> IPSec ->
Phase-2 Profiles-> <Multi-Proposal>
->
![]() |
Enabled |
Lifetime |
VPN -> IPSec ->
Phase-2 Profiles-> <Multi-Proposal>
->
![]() |
e.g. 3600 and 0 |
Alive Check |
VPN -> IPSec
->Phase-2 Profiles -> <Multi-Proposal>
->
![]() |
Disabled |
Propagate PMTU |
VPN -> IPSec
->Phase-2 Profiles -> <Multi-Proposal>
->
![]() |
Disabled |
Copyright© Version 01/2020 bintec elmeg GmbH |