Example scenario IPSec with callback
Introduction |
The configuration of an IPSec VPN with callback (IP address in the B/D-channel) with a bintec RS232bw™ is described in the following chapters.
Configuration is performed with the GUI™ (Graphical User Interface).
The branch office of a company is to be connected to the head office over an IPSec tunnel. An xDSL connection is available for the Internet connection in both the branch office and head office. Both devices receive their IP address dynamically from the Internet Service Provider (ISP). To set up the IPSec tunnel in both directions, the IP address should be transferred to the partner over ISDN.
Example scenario IPSec with callback
The following are required for the configuration:
Two bintec RS232bw™ gateways.
Boot image from version 7.10.1
An xDSL internet access at head office and at the branch
An ISDN connection at head office and at the branch
The LAN must be connected to one of the ports 1 to 4 on the gateway
| Copyright© Version 01/2020 bintec elmeg GmbH |