Changing the Phase-1 Profiles |
Go to the following menu to change the profile for phase-1:
Go to
VPN -> IPSec -> Phase-1
Profiles-> <Multi-Proposal>
->
.
VPN -> IPSec -> Phase-1
Profiles-> <Multi-Proposal>
->
Configure the phase-1 profile with the following parameters:
Under Description define a name for the profile, e.g. Branch Office .
Under Proposal Encryption select AES , under Authentication select MD5 .
Since at least one proposal must be configured at any one time, the first entry in the list is enabled by default.
Set Mode to Aggressive , as you are using dynamic IP addresses.
Under Local ID Type choose Fully Qualified Domain Name (FQDN) .
Under Local ID Value enter the local ID of the gateway, e.g. Head Office (set under Peer ID for the Partner).
Click Advanced Settings.
Under Alive check select Inactive .
Confirm with OK.
Copyright© Version 01/2020 bintec elmeg GmbH |