Configure the external ISDN port to operate on the ISDN point-to-point connection |
In its ex works state, the elmeg hybird 120/130™ is ready to operate on a point-to-point ISDN access. Proceed as follows in order to modify the existing ISDN point-point connection:
Go to
Assistants -> PBX -> Trunks -> ISDN Extern
.
Assistants -> PBX -> Trunks -> ISDN Extern
Proceed as follows:
A Name has already been defined, here e.g. ISDN Extern .
Under Ports, select a port from the list via the Add option, e.g. S/U 1 ein.
Under P-P Base Number, enter the base number, e.g. 9294 .
Leave the Class of Service set to CoS Default .
Confirm you settings with OK.
A successfully established ISDN point-to-point connection is marked with a
.
Copyright© Version 01/2020 bintec elmeg GmbH |