Configuration of  elmeg hybird

You must configure the gateway and the DNS server settings of the elmeg hybird™. The configuration is done using the elmeg hybird™ GUI.

  1. Go to Assistants -> First steps -> Basic Setup.

Assistants -> First steps -> Basic Setup

Proceed as follows to make the gateway and DNS settings:

  1. Enter the IP address of your gateway that you use to provide Internet access under Standard Gateway IP Address, e.g. 192.168.0.254 .

  2. Enable Fixed DNS Server Address.

  3. Enter the IP address of the name server for Internet address name resolution under DNS Server 1; here it is 192.168.0.254 .

  4. Leave the remaining settings unchanged and confirm them with OK.

Copyright© Version 01/2020 bintec elmeg GmbH