QSC-IPfonie basic

The option User Name must be enabled for the SIP header for the SIP provider QSC-IPfonie basic. By doing so, this then makes it possible to use different numbers for outgoing calls.

Go to VoIP -> Settings -> SIP Provider -> <qsc_ipfonie_ basic> -> .

VoIP -> Settings -> SIP Provider -> <qsc_ipfonie_ basic> ->

Proceed as follows to extend the SIP header:

Enable the option User Name under SIP Header Field(s) for Caller Address.
Leave the remaining settings unchanged and confirm them with OK.

	Note
	If the PBX Wizard is used again for this connection, then all settings are reset in the VoIP -> Settings -> SIP Provider menu.