Introduction

There is no S2M module for the elmeg hybird 300/600™, so at the exchange the connection to the S2M has to be established using the bintec RT4402™ media gateway.

The subscribers/telephones log into the elmeg hybird 300/600™ in the usual way. The elmeg hybird 300/600™, in turn, uses the bintec RT4402™ media gateway as the SIP provider. bintec RT4402™ ensures that all the calls are routed via the S2M line. Other connections, for example an Internet SIP provider or a point-to-multipoint connection, can also be set up on the bintec RT4402™ at the same time, of course. Appropriate call routing can then be used to assign the connections to different subscribers and/or telephone systems.

Here, though, it is only the connecting of an elmeg hybird 300/600™ to the S2M that is described.

The GUI is used to do the configuration.

Example scenario

Requirements

These requirements must be met:

The S2M interface must be switched on and functional
bintec RT4402™ basic configuration (e. g. IP address, Internet access) with Version 7.9.6 patch 6 or later
elmeg hybird 300™ or elmeg hybird 600™ basic configuration (e. g. IP address, subscribers, terminals) with Version 7.9.1 patch 4 or later
Sufficient SIP channel licences for the elmeg hybird 300™ or elmeg hybird 600™